SPZ-52H-23CV 52" Scag Patriot Zero Turn Lawn Mower (SPZ-52H-23CV)

MODEL NUMBER: SPZ-52H-23CV

ENGINE

General Type:

·         Heavy-duty industrial/commercial

Brand:

·         Kohler Command Pro

Model:

·         CV732

Horsepower:

·         Minimum 23HP @ 3600 RPM

Type:

·         Four-cycle gas, forced air-cooled, OHV, twin-cylinder, vertical shaft engine

Displacement:

·         732 cc

Cylinder:

·         Two cast-iron sleeves

Governor:

·         Mechanical governor with variable speed control set at 3600 rpm (±100 rpm), idle set at 1750 rpm (±150 rpm)

Air Cleaner:

·         Large capacity dual element canister air cleaner, chopper-type grass screen

Exhaust:

·         Scag designed, low noise, low temperature, aluminized exhaust

Fuel Pump Group:

·         Pulse-type fuel pump with in-line filter, fixed jet carburetor

Oil Pump Group:

·         Positive displacement Gerotor Oil Pump

Starter/Electrical:

·         12 volt "maintenance-free" sealed battery (350 CCA) with alternator, solid-state ignition with key start, electronic spark system

Charging System:

·         13 amp

ENGINE DECK / FRAME

Fuel Tank:

·         Single 6.5-gallon tank with an extra-large easy-fill opening, oversized fuel cap, fuel gauge, molded-in cup holder and storage tray

Drive Wheels/Tires:

·         22 x 10.5 - 12 pneumatic tubeless, radius edge, wide offset rims for better traction

Parking Brake:

·         Foot-operated brake with park lock feature. AUSCO disc brakes feature a rotor and caliper style design for maximum holding power.

Frame:

·         Compact frame design with structural steel tube construction, welded. Engineered for an ultra-low center-of-gravity for increased incline performance.

Foot Plate:

·         Pierced, extruded steel tread pattern for permanent non-slip traction; rubber iso-mounted to reduce vibration and increase operator comfort.

DRIVE SYSTEM

Type:

·         Hydro drive with two Hydro-Gear ZT-3100 hydro transaxles with charge pumps for independent control of each drive wheel

Transmission Belt Idler:

·         Self-adjusting, self-tightening, with permanently lubricated bearings

Hydro Fluid:

·         5 qt. system capacity, uses SAE 20W50 fluid and 25 micron filters (one filter per transaxle)

Steering/Travel Control:

·         Twin lever fingertip steering control with gas shock dampeners for smooth, responsive control to each wheel

Axles:

·         1.125" heavy-duty axle

Wire Harness:

·         16 gauge wire, tightly wound protective wire loom, dielectric grease at major electrical connections

Safety Group:

·         Seat actuated engine kill, neutral interlock, mower engagement (PTO) switch, parking brake

Instrument Panel:

·         Mounted at the left side of the operating position for easy access. Key switch, throttle, fuses, manual choke, PTO switch. Digital hour meter displays maintenance reminders.

Forward Ground Speed Range:

·         0 up to 8.5 mph

Reverse Ground Speed Range:

·         0 up to 5.0 mph

CUTTER DECK

Type:

·         Floating Hero Cutter Deck, adjustable anti-scalping, hybrid design combines out-front and belly-mount designs; cutting chamber design provides a fast, manicured cut.

Construction:

·         Dual-plate construction consists of a 10-gauge steel cutter deck top reinforced with an 11-gauge spindle support plate. Deck skirt is 7-gauge.

True Cutting Width:

·         52.0 inches (122.00 cm)

Cutting Height Adjustment:

·         Foot-operated pedal adjustment with easy-access deck latch lever adjusts from operator’s seat, 1-1/2" to 5" in 1/4" increments.

Cutter Blades:

·         Three high-strength cutter blades

Blade Engagement:

·         Electric PTO via Ogura GT2 (108 ft. lb) clutch brake with control panel knob

Caster Wheels:

·         13 x 5 - 6 caster wheels (4-ply) with maintenance-free igus iglide polymer sleeve bearings; dual sealed ball bearings in caster wheel pivots

Spindles:

·         Spindle shaft with aluminum housing and sealed ball bearings, featuring a maintenance-free design

Idler Arm:

·         Spring-loaded for continuous belt adjustment and extended lifespan, with maintenance-free iglide polymer flange bearing

Spindle Pulleys:

·         Split steel design, offering increased strength compared to stamped or cast-iron pulley designs

Cutter Deck Belts:

·         B-section with Kevlar cord

Anti-Scalp:

·         Includes one roller on the left-front edge, two rollers on the center-front edge, and a skid plate at the rear-center

Deck Leveling:

·         Four-corner deck leveling system ensures precise pitch and level adjustments

Discharge Chute:

·         Constructed from highly flexible material, the discharge chute resists denting and minimizes impact on landscaping features

APPROXIMATE DIMENSIONS

Length:                                                              73"

Tracking Width:                                                 47.5"

Width:                                                               64.5"

Width (with discharge in transport position):   53"

Height (with ROPS):                                          61"

Turning Radius:                                                 Zero Radius Turning

Weight:                                                             911 lbs.